Applications
Ionphase™ fSTAT2 is designed to be used in general extrusion applications with polyolefins. Examples of end applications include electrostatic discharge (ESD) protected films and bags, FIBC and octabin liners, protective films and polyolefin sheets.

Mode of action
Ionphase™ fSTAT2 is a static dissipative, polymeric polymer additive commonly known as a permanent anti-static additive. These additives are used to control static electricity in plastics. This works by forming an interpenetrated network within the host polymer reducing the resistivity of the blend.

Benefits

• Permanent non-migrating anti-stat

• Not humidity dependent

• Static dissipative

• Gives control and safety for static electricity caused issues

• Lowers the surface resistivity

• Improves the non-charging properties

• Reduces charge decay time

• Good film transparency compared to other permanent solutions

• Good surface resistivity in very thin film surface layer

• Requires only one layer to function

• Improved sealing strength compared to other permanent solutions

Recommended Polymers

• LDPE

• LLDPE

• PP

Guidelines for use
Ionphase™ fSTAT2 is normally processed at 180-280 °C. Actual processing temperatures will usually be determined by specific equipment or host polymer. We suggest adding the material as an additive during the extrusion process. Use of a barrier type screw with good mixing properties is recommended for good homogeneity of the polymer blend. Stainless steel with nitration, duplex chrome or nickel plating is recommended for screws, barrels, dies and adapters. Low MFI polyethylene is recommended for purging after using Ionphase™ fSTAT2. The required loading of Ionphase™ fSTAT2 depends on the host polymer used, processing method and the targeted level of static dissipation.