SW-RTS-12 is a liquid tin stabilizer which offers significant performance advantages in a wide variety of demanding rigid PVC applications. It provides an outstanding combination of excellent
initial color and an ability to maintain good color hold during processing.

Application
1. Especially recommended for single and multiscrew extrusion of potable water, sewer,
irrigation pipe and telephone duct.
2. Recommended for other rigid PVC extrusions such as interior rigid and foamed profile.
3. Because of its superior performance, SW-RTS-12 is used to stabilize the foam core of rigid PVC foam core pipe.
4. SW-RTS-12 is an essential part of many multicrew potable water and DWV pipe formulations. Typical use level is from 0.30 phr to 0.50 phr.
5. SW-RTS-12 is ideally suited for use in electrical conduit and other Type II applications in combination with process aids, impact modifiers and fillers.
6. Production experience has shown the use of SW-RTS-12 results in the production of whiter, consistently high quality pipe at high output rates with excellent cost/performance.
7. SW-RTS-12 is recognized by both NSF nad PPI for use in potable water and DWV formulations under the generic formulation of both NSF and PPI. Approved use levels are 0.3 to 1.0 phr.