¡Cree su cuenta gratis hoy!

Dense Fill™ DF225

Familia genérica: Additive -- Flame Retardant -- Aluminum or Magnesium Hydroxide • Suministrado por: The R.J. Marshall Company

The R.J. Marshall Company offers a full line of alumina trihydrate solid surface filler systems. The Dense Fill series offers excellent stain resistance, easy wet-out and excellent air release properties. These Dense Fill products are easy to pigment, allowing the creation of a wide range of colors for custom applications. As in all ATH materials, meeting Class I flame and smoke requirements is an added benefit.

Suggestions For Use:
Equipment

The basic equipment needed for solid surface manufacturing includes a vacuum mixer or continuous casting machine with a densifier, appropriate molds, a table sander, and necessary saws and routers. For additional information, please see our paper entitled Solid Surface Manufacturing.

Resin Suggestions

Consult your resin supplier for the appropriate resin to use. The appearance of the final product may vary in color consistency when different resins are used. The recommended resin level for most DF applications is 33-38% by weight. This percentage may vary depending on the resin viscosity, ambient and matrix temperatures and your preferred mix consistency.

Catalyst Level

Choose a catalyst suitable for use with alumina trihydrate and your solid surface resin. A catalyst level of 1.5% by weight of resin is a recommended starting point. Differing catalyst levels can change the overall color of the material. The gel time should be between 20 and 30 minutes. If excessive gel times are experienced, a change in catalyst may be necessary.

Matrix Consistency

When the resin level is around 33-38% by weight, the matrix should have a workable consistency. The use of additives such as DC Granules or Hylite Granules may require a higher viscosity mix and less or no vibration.

Vibration

If vibration is necessary, it should be minimal. Vacuum mixing, creating a matrix with an appropriate viscosity, and using proper pouring techniques should eliminate air entrapment in the matrix.

Thermal Cycling

When poured by standard manufacturing procedures, our Dense Fill will meet or exceed all ANSI/ICPA SS-1-2001 certification standards.

Propiedades generales

Acceda a los detalles completos de la hoja de datos de Dense Fill™ DF225 cuando cree su cuenta gratuita con Prospector. Encontrará información completa sobre especificaciones físicas, mecánicas y de dureza

Estado del material

Comercial: Activo

Documentos

Technical Datasheet (English)

Descargar documento

Disponibilidad

Europa, Norteamérica

Otras propiedades

Additives Category, Formas, Flame Retardant Functional Type, Densidad, Average Particle Size, Temperatura de Fusión, Chemical Description

Access 7 properties in Additives. Create your free account or sign into Prospector.

Procesando

Encuentre información de procesamiento específica para Dense Fill™, así como información general para la familia genérica de Additive -- Flame Retardant -- Aluminum or Magnesium Hydroxide. Registrarse o Iniciar sesión para obtener más información.