Applications
Ionphase™ rSTAT2 UV is designed to be used in extrusion blow molding applications.
Ionphase™ rSTAT2 UV is stabilized against weathering. Examples of end applications include rigid intermediate bulk containers, drums and canisters.

Mode of action
Ionphase™ rSTAT2 UV is a static dissipative,polymeric polymer additive commonly known as a permanent antistatic additive. These additives are used to control static electricity in plastics. This works by forming an interpenetrated network within the host polymer reducing the resistivity of the blend.

Benefits

• Permanent non-migrating anti-stat

• Not humidity dependent

• Static dissipative

• Gives control and safety for static electricity caused issues

• Lowers the surface resistivity

• Improves the non-charging properties

• Reduces charge decay time

• No halogens, RoHS approved

• Recyclable

• Ready to use and compatible with host polymer

Recommended Polymers

• HDPE

Guidelines for use
Ionphase™ rSTAT2 UV is normally processed at 180- 250 °C. Actual processing temperatures will usually be determined by specific equipment or host polymer. We suggest adding the material as an additive during the extrusion process. Compounding into the host polymer is highly recommended before injection molding. Use of a barrier type screw with good mixing properties is recommended for good homogeneity of the polymer blend. Stainless steel with nitration, duplex chrome or nickel plating is recommended for screws, barrels, dies and adapters. Low MFI polyethylene is recommended for purging after using Ionphase™ rSTAT2 UV. The required loading of Ionphase™ rSTAT2 UV will depend on the host polymer, processing method and the targeted level of static dissipation.