Applications
Ionphase™ U3 is designed to be used in compounding, injection molding and extrusion applications with polyolefins and styrenics. Examples of end applications are sheets and trays for electronic components or PCB, boxes and containers, and dust prevention for automotive interior parts.

Mode of action
Ionphase™ U3 is a static dissipative, polymeric polymer additive commonly known as a permanent antistatic additive. These additives are used to control static electricity in plastics. This works by forming an interpenetrated network within the host polymer reducing the resistivity of the blend.

Benefits

• Permanent non-migrating anti-stat

• Not humidity dependent

• Static dissipative

• Gives control and safety for static electricity caused issues

• Lowers the surface resistivity

• Improves the non-charging properties

• Reduces charge decay time

• No halogens, RoHS approved

• Recyclable

• Ready to use and compatible with host polymer

Recommended Polymers

• HDPE

• PP

• PS

• ABS

• PA12

Guidelines for use
Ionphase™ U3 is delivered pre-dried in Al moisture barrier bags. Due to the hydrophilic nature of the material, do not expose the dried material to high humidity conditions in open containers or bags. If the material is exposed to moist air, it should be dried before use. Our recommendation is to use desiccant dryer (dew point < -40 °C) for 3-5 hours at 80 °C before processing. Moisture level should be below 0.06 % after drying. If the materials are not dried, surface defects and process related problems may occur in processing. We suggest feeding the material directly from drier to the hopper for best results.
Store in a dry, well-ventilated place at 20 25 °C (68 77 °F).
Ionphase™ U3 has a maximum shelf life of 730 days when stored accordingly.