Dense Fill™ DF225
Suggestions For Use:
Equipment
- The basic equipment needed for solid surface manufacturing includes a vacuum mixer or continuous casting machine with a densifier, appropriate molds, a table sander, and necessary saws and routers. For additional information, please see our paper entitled Solid Surface Manufacturing.
Resin Suggestions
- Consult your resin supplier for the appropriate resin to use. The appearance of the final product may vary in color consistency when different resins are used. The recommended resin level for most DF applications is 33-38% by weight. This percentage may vary depending on the resin viscosity, ambient and matrix temperatures and your preferred mix consistency.
Catalyst Level
- Choose a catalyst suitable for use with alumina trihydrate and your solid surface resin. A catalyst level of 1.5% by weight of resin is a recommended starting point. Differing catalyst levels can change the overall color of the material. The gel time should be between 20 and 30 minutes. If excessive gel times are experienced, a change in catalyst may be necessary.
Matrix Consistency
- When the resin level is around 33-38% by weight, the matrix should have a workable consistency. The use of additives such as DC Granules or Hylite Granules may require a higher viscosity mix and less or no vibration.
Vibration
- If vibration is necessary, it should be minimal. Vacuum mixing, creating a matrix with an appropriate viscosity, and using proper pouring techniques should eliminate air entrapment in the matrix.
Thermal Cycling
- When poured by standard manufacturing procedures, our Dense Fill will meet or exceed all ANSI/ICPA SS-1-2001 certification standards.
Propriedades gerais
Acesse os detalhes completos da ficha de dados de Dense Fill™ DF225 quando você criar sua conta gratuita no Prospector. Você encontrará informações completas sobre especificações físicas, mecânicas e de dureza
Technical Datasheet (English)
Baixar o documentoProcessamento
Encontre informações de processamento específicas para Dense Fill™, além de informações gerais para a família genérica Additive -- Flame Retardant -- Aluminum or Magnesium Hydroxide. Inscreva-se ou Faça login para mais informações.
Onde comprar
Você pode adquirir Dense Fill™ DF225 de 1 distribuidores ou fabricantes. Inscreva-se ou Faça login para mais informações.
PROSPECTOR
Encontre soluções, não somente materiais.
Quando se junta ao Prospector, você se beneficia de recursos e ferramentas dinâmicas para encontrar soluções rapidamente..
Inscreva-se hoje mesmo