Crie sua conta gratuita hoje mesmo!

Dense Fill™ DF230

Família genérica: Additive -- Flame Retardant -- Aluminum or Magnesium Hydroxide • Fornecido por: The R.J. Marshall Company

The R.J. Marshall Company offers a full line of alumina trihydrate solid surface filler systems. The Dense Fill series offers excellent stain resistance, easy wet-out and excellent air release properties. These Dense Fill products are easy to pigment, allowing the creation of a wide range of colors for custom applications. As in all ATH materials, meeting Class I flame and smoke requirements is an added benefit.

Suggestions For Use:
Equipment

The basic equipment needed for solid surface manufacturing includes a vacuum mixer or continuous casting machine with a densifier, appropriate molds, a table sander, and necessary saws and routers. For additional information, please see our paper entitled Solid Surface Manufacturing.

Resin Suggestions

Consult your resin supplier for the appropriate resin to use. The appearance of the final product may vary in color consistency when different resins are used. The recommended resin level for most DF applications is 33-38% by weight. This percentage may vary depending on the resin viscosity, ambient and matrix temperatures and your preferred mix consistency.

Catalyst Level

Choose a catalyst suitable for use with alumina trihydrate and your solid surface resin. A catalyst level of 1.5% by weight of resin is a recommended starting point. Differing catalyst levels can change the overall color of the material. The gel time should be between 20 and 30 minutes. If excessive gel times are experienced, a change in catalyst may be necessary.

Matrix Consistency

When the resin level is around 33-38% by weight, the matrix should have a workable consistency. The use of additives such as DC Granules or Hylite Granules may require a higher viscosity mix and less or no vibration.

Vibration

If vibration is necessary, it should be minimal. Vacuum mixing, creating a matrix with an appropriate viscosity, and using proper pouring techniques should eliminate air entrapment in the matrix.

Thermal Cycling

When poured by standard manufacturing procedures, our Dense Fill will meet or exceed all ANSI/ICPA SS-1-2001 certification standards.

Propriedades gerais

Acesse os detalhes completos da ficha de dados de Dense Fill™ DF230 quando você criar sua conta gratuita no Prospector. Você encontrará informações completas sobre especificações físicas, mecânicas e de dureza

Status do material

Comercial: Ativo

Documentos

Technical Datasheet (English)

Baixar o documento

Disponibilidade

América do Norte, Europa

Outras propriedades

Additives Category, Formas, Flame Retardant Functional Type, Densidade, Average Particle Size, Ponto de Fusão, Chemical Description

Access 7 properties in Additives. Create your free account or sign into Prospector.

Processamento

Encontre informações de processamento específicas para Dense Fill™, além de informações gerais para a família genérica Additive -- Flame Retardant -- Aluminum or Magnesium Hydroxide. Inscreva-se ou Faça login para mais informações.