Optislip™ EBO
Optislip™ EBO is a secondary bis amide effective medium slip and anti-block agent in polyolefin polar copolymers. It is particularly useful as a pellet anti-tack additive in EVA.
Mode of Action
Optislip™ EBO can be dispersed evenly through the polymer in the melt phase. It migrates to the surface of the polymer where it forms a thin lubricating layer. This layer reduces coefficient of friction between surfaces and reduces unwanted adhesion.
Benefits
- Medium slip and anti-block
- Anti-tack additive for EVA
- Thermal stability
Recommended Polymers
- All polyolefins
- EVA
- PVC
Guidelines for Use
Optislip™ EBO is an internal additive and can be incorporated into resin as supplied or via masterbatch / pre-blend. Experience has shown that simple manual mixing prior to processing will normally give an acceptable dispersion though, mechanical means are preferred.
Typical addition levels vary depending on polymer and lubrication required.
Recommended levels are around 500 - 2000ppm in films and 0.2 - 1.0 % in molding applications.
一般属性
使用 Prospector 建立免費帳戶時,可造訪 Optislip™ EBO 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
Technical Datasheet (English)
下载文档加工
Find specific processing information for Optislip™ as well as general information for the Additive -- Antiblock generic family. 注册 或 登录 了解更多信息。