STRUKTOL® 40 MS
- Mixture of dark aromatic hydrocarbon resins
RECOMMENDATIONS FOR APPLICATION
- STRUKTOL® 40 MS improves the homogeneity of elastomers of different polarity and viscosity. It is rapidly absorbed by the polymers during the mixing cycle. A relatively low viscosity mass is quickly achieved into which other compounding ingredients can easily be incorporated. The homogenizing agents are particularly effective with those elastomer blends which tend to crumble at the beginning of the mixing cycle. In most cases 40 MS is added along with the polymers in the mixing cycle. The reduction of compound viscosity and "nerve" achieved with STRUKTOL® 40 MS assists downstream processing. For instance, bagging tendency can be reduced, extrusion rates are increased without increasing die swell, and calendering properties are improved. These benefits are retained even after long storage periods of the green compound.
- STRUKTOL® 40 MS increases the green tack of many compounds although strictly it is not a tackifier. It does, however, boost the efficiency of other tackifying agents.
- STRUKTOL® 40 MS does not harden during vulcanization. The hardness of the vulcanizate is not reduced as much as when using, for example, mineral oil plasticizers. Because of its color, STRUKTOL® 40 MS is not suitable for light colored compounds. Staining may occur under certain conditions. Where non staining is specified, STRUKTOL® RP 28 should be used.
- STRUKTOL® 40 MS has good solubility in aromatic and chlorinated hydrocarbon oils.
一般属性
使用 Prospector 建立免費帳戶時,可造訪 STRUKTOL® 40 MS 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
Technical Datasheet (English)
下载文档加工
Find specific processing information for STRUKTOL® Plastic Additives as well as general information for the Additive -- Compatibilizer / Adhesion Promoter generic family. 注册 或 登录 了解更多信息。