Mediaplast AT
For compounds based on chloroprene, low dosages (= 1 phr) are generally sufficient because Mediaplast AT is very effective within this polymer.
In ACM and VAMAC compounds, tests have shown a significant improvement of rubber compound flow, whereas physical properties (e.g. compression set) are only slightly influenced.
Mediaplast AT is based on highly effective polar substances. Therefore it should only be used in small amounts (max. 1 phr) with low polarity polymers. A dosage of about 0.5 phr is recommended for sticky EPDM compounds with high plasticizer content.
The dosage for polar polymers should be 1-3 phr depending on the stickiness of the compound.
The melting point of the active substance of Mediaplast AT is approx. 55 °C.
一般属性
使用 Prospector 建立免費帳戶時,可造訪 Mediaplast AT 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
Technical Datasheet (English)
下载文档加工
Find specific processing information for Mediaplast as well as general information for the Additive -- Slip Agent / Lubricant / Mold Release / Processing Aid generic family. 注册 或 登录 了解更多信息。