Antitack BTO-15
Modern detergents in combination with water-soluble polymers are responsible for the strong wetting abilities of Antitack BTO-15. The antitack agent is even suitable for compounds with a high content of plasticizers and guarantees an excellent separation of rubber batches, strips and granules. After application and evaporation of the water a very thin transparent polymer film will stay on the surface of the rubber batches, strips or granules. Up to a certain elongation, the polymer film will be flexible to ensure good separation of the rubber compounds after a long storage time or especially for rubber compounds with cold flow. Additionally Antitack BTO-15 contains a small quantity of pyrogenic silica to decrease the slipperiness of the antitack film.
Antitack BTO-15 is very economical to use. At rubber companies producing technical rubber parts by using all kinds of polymers and rubber compounds with different hardness, a dilution ratio of 1:20 (5 %) has been tested successfully, however, it is recommended to control the concentration of the antitack bath continuously. The minimum dilution rate should be 1:15. If the dosage of the antitack agent is higher than 1:15 the water-soluble polymers might create a thick layer on the batches, reversing the release effect and causing stickiness.
Due to the conductivity of the Antitack BTO-15 concentrate, the dilution ratio can be controlled by a conductivity meter. For further information please contact us.
Besides anti-rust and anti-foam agents, Antitack BTO-15 contains detergents which are 100% biologically degradable within 14 days, according to the OECD 302 B guidelines.
一般属性
使用 Prospector 建立免費帳戶時,可造訪 Antitack BTO-15 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
Technical Datasheet (English)
下载文档加工
Find specific processing information for Antitack as well as general information for the Additive -- Slip Agent / Lubricant / Mold Release / Processing Aid generic family. 注册 或 登录 了解更多信息。