AFCONA 3231
Product Properties:
- AFCONA-3231 gives very good slip and the slip characteristic is oily type, also called as wet look appearance. Therefore, it can enhance visually film thickness AFCONA - 3231 normally used in metal coatings like industrial baking systems, car refinish polyurethane top clear coats and other vehicle paint.
- AFCONA - 3231 also widely used in UV coatings due to the good leveling and slip performance. However, it does not contain any reactive functional group that can cross-link with UV resin system.
- Due to its high surface activity, AFCONA-3231 can interfere with intercoat adhesion when recoated without sanding. If air is introduced by the application equipment, the use of small amounts of defoamers such as AFCONA-2020 and AFCONA-2022 are recommended.
AFCONA - 3231 is recommended in below systems:
- 2K Polyurethane. It gives low sensitivity to inner bubble.
- Industrial baking systems where baking temperature is less than 170°C. In normal case, AFCONA - 3030 or AFCONA - 3233 is recommended for industrial baking systems. However, if higher slip is needed, AFCONA -3231 will be the better choice.
- UV coatings. A lot of time, AFCONA - 3231 is selected for UV due to the less foam stabilizing effect and good compatibility.
一般属性
使用 Prospector 建立免費帳戶時,可造訪 AFCONA 3231 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
Technical Datasheet (English)
下载文档加工
Find specific processing information for AFCONA as well as general information for the Additive -- Slip Agent / Lubricant / Mold Release / Processing Aid generic family. 注册 或 登录 了解更多信息。