Anhui Elite 602 Datasheet

Compatibilizer / Adhesion Promoter Additive

Supplied by Anhui Elite Industrial Co., Ltd

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
(1) It can be used as adhesion promoter in polysulfide, polyvinyl chloride plastisol, sillcone, one-and two-part urethanes, and epoxy adhesives and sealants.

(2), as additive in phenolic and epoxy molding compounds, also can be used as additive to latex coatings, adhesives and sealants
Silane 602 may be used as an additive, eliminating the need for special primers in numerous bonding applications.

Specific systems that demonstrate improved adhesion Silane 602 used are:

A), RTV silicones and hybrid silane-crosslinked sealants
Silane 602 addition to one-and tow-part silicone-crosslinked sealants improves adhesion to a variety of substrates, including glass, aluminum and concrete. Silane 602 provides enhanced adhesion performance without negatively impacting elongation. It is added at a loading of 0. 5 to 1. 0 percent by weight.

B), Polysulfide sealants
When added to one-and two-part polysulfide sealants, Silane 602 provides better adhesion to a variety of substrates, including glass, aluminum and steel. Silane 602 is typically used at a loading of 0. 5to 1. 0 percent by weight of the sealant. It disperses well into the sealant and produces cohesive failure in the sealant rather than adhesive failure of the bond between the sealant and the substrate. Furthermore, the use of Silane 602 eliminates the need for primers, Normally required to achieve adhesion adhesion to surfaces.

C), Plastisol sealants
Adding Silane 602 as a replacement for polyaminoamide adhesion promoters in plastisol sealants improves bonding to metal substrates. In addition to increased strength, the silane modifiedd plastisol sealant adhesion promoters. Silane 602modified systems have a very light color, and the cured compound is bubble-free.

Additive in phenolic and epoxy molding compounds,
Silane 602, as an additive in phenolic and epoxy molding compounds, reduces the water absorption of molded composites. This, in turn, leads to improves wet electrical properties, particularly at low frequencies.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Available Documents
Technical Datasheet (English)
Additives General
Nominal Value
Unit
 
Additives Category
 
 
Recommended for Use In
 
 
Forms
 
 
Additives Physical
Nominal Value
Unit
 
Density 2
g/cm³
 
Boiling Temperature
°F
 
Chemical Description
 
 
Notes
1Typical properties: these are not to be construed as specifications.
2@ 20°C
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.