Antex AT-166 Datasheet

Plasticizer Additive

Supplied by Antex Chemical (Zhongshan) Ltd.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
AT-166 is widely used as a thickening agent in emulsion paint, textile back coating, flocking, and pigment printing and adhesive reformation industries.
Safety and Disposal
  • Eye Contact: Flush eyes thoroughly with water for several minutes. Remove contact lenses after the initial 1-2 minutes and continue flushing for several additional minutes. If effects occur, consult a physician, preferably an ophthalmologist.
  • Skin Contact:Wash skin with plenty of water.
  • Inhalation: Move person to fresh air; if effects occur, consult a physician.
  • Ingestion: If swallowed, seek medical attention. Do not induce vomiting unless directed to do so by medical personnel.
  • Notes to physician: No specific antidote. Treatment of exposure should be directed at the control of symptoms and the clinical condition of the patient.
Environmental information
This product is water base, non-toxic, and non-flammable, for proper spill and disposal treatment methods, please look into our relevant MSDS.
Storage Conditions
The product should be kept in a closed container at an ambient temperature between 5°C- 35°C and avoid to expose to direct sunlight.
Package / Form of supply
50KG, 125KG plastic bucket and 200KG metal pail. Antex label.
Material Status 
  • Commercial: Active
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Available Documents
Technical Datasheet (English)
Additives General
Nominal Value
Additives Category
Recommended for Use In
Additives Physical
Nominal Value
Average Particle Size
State at Room Temperature
Boiling Temperature
1Typical properties: these are not to be construed as specifications.
UL LLC ©2023. All rights reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.