Technicure® D-10 Boletín técnico

Technicure® D-10 is one of the more common of several pulverized grades of
dicyandiamide containing 1% fumed silica as a flow control agent to inhibit clumping and improve flow. D-10 can also be ordered without a flow control agent or with different levels of a flow control agent, as necessary. Typically used with epoxy resins (EEW 190) between 6-8phr, the reactivity of dicyandiamide increases inversely proportional to the particle size. Additionally, dicyandiamide tends to react with epoxies at higher temperatures, >180C, unless an accelerator is used. Accelerators that have minimal effect on latency while decreasing the activation temperature to less than 100C can be used. Some suggested accelerators for D-10 include Technicure LC-80, Technicure LC-100 any of the substituted ureas, including Technicure MDU-11, Technicure PDU-17 or Technicure TDU-20. These accelerators will decrease the activation temperature of dicyandiamide, without compromising, and perhaps enhancing performance properties.

ADVANTAGES

• Long Pot Life with epoxy resins

• Easily Accelerated

• High Tg's

• Excellent Adhesion to a variety of substrates

• Used in Powder Coatings, Prepregs as well as Adhesives