Technicure® D-10 Planilha

Slip Agent / Lubricant / Mold Release / Processing Aid Additive

Fornecido por A&C Catalysts, Inc.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Crie Sua Conta Gratuita
Descrição do Produto
Technicure® D-10 is one of the more common of several pulverized grades of
dicyandiamide containing 1% fumed silica as a flow control agent to inhibit clumping and improve flow. D-10 can also be ordered without a flow control agent or with different levels of a flow control agent, as necessary. Typically used with epoxy resins (EEW 190) between 6-8phr, the reactivity of dicyandiamide increases inversely proportional to the particle size. Additionally, dicyandiamide tends to react with epoxies at higher temperatures, >180C, unless an accelerator is used. Accelerators that have minimal effect on latency while decreasing the activation temperature to less than 100C can be used. Some suggested accelerators for D-10 include Technicure LC-80, Technicure LC-100 any of the substituted ureas, including Technicure MDU-11, Technicure PDU-17 or Technicure TDU-20. These accelerators will decrease the activation temperature of dicyandiamide, without compromising, and perhaps enhancing performance properties.

  • Long Pot Life with epoxy resins
  • Easily Accelerated
  • High Tg's
  • Excellent Adhesion to a variety of substrates
  • Used in Powder Coatings, Prepregs as well as Adhesives
Status do Material 
  • Comercial: Ativo
  • América do Norte
Available Documents
Technical Datasheet (English)
Additives General
Valor Típico
Additives Category
Recommended for Use In
NFPA 704 Safety Rating (1)
Additives Physical
Valor Típico
Average Particle Size
1Propriedades típicas: não devem ser consideradas como especificações.
UL LLC ©2023. Todos direitos reservados.
As informações apresentadas nesta planilha foram adquiridas pela UL Prospector do produtor do material. A UL Prospector faz substanciais esforços para assegurar a exatidão destes dados. Entretanto, a UL Prospector não assume qualquer responsabilidade pelos valores dos dados e recomenda que ao final da seleção dos materiais, pontos de dados sejam validados com o fornecedor do material.